What are syscalls?

Applications require actions from the kernel to perform several tasks it cannot handle by itself. Accessing files, connecting to sockets, creating processes are examples of tasks handled by the kernel. System calls are the interface for an application to interact with the kernel.

Using strace

The strace tool can be used to monitor interaction between a process and the kernel. It displays system calls initiated by the process, and signals received by the process.

Consider the simple script:

echo "one line of text" > my_input.txt
while read line
        echo $line > my_output.txt
done < my_input.txt
rm my_input.txt


When invoking this script using strace -omy_strace.log -ff ./, the output of every (forked) process is written to my_strace.log.<pid>. Let’s examine the logfile of our parent process (parts of the output are omitted, let’s focus on the relevant stuff) :

execve("./", ["./"], [/* 17 vars */]) = 0

execve executes the file “” with arguments ”./” (by convention the first should be the filename to be executed) and 17 environmental variables. At this point there are already 3 file descriptors open: stdin (fd 0), stdout (fd 1), stderr (fd2).


open("./", O_RDONLY|O_LARGEFILE) = 3
read(3, "#!/bin/bash\necho \"one line of te"..., 80) = 80
dup2(3, 255)                            = 255
close(3)                                = 0
read(255, "#!/bin/bash\necho \"one line of te"..., 126) = 126

open prepares the file for reading in file descriptor 3 (result of the syscall open). Next, read attempts to read the next 80 bytes from fd (file descriptor) 3.

At this point the interpreter line of the script is read, indicating that the /bin/bash binary needs to be invoked to process the script. dup2 copies the fd 3 to the (new) fd 255. This is a bash-specific operation, don’t mind too much; bash keeps the original file in fd 255 (last of the process’ private fd) to free up low-numbered fd’s.

Now that our original file is open in fd 255, fd 3 is not needed anymore and can be closed by close. At last the next 126 bytes (rest of the file) are read and stored in the buffer, now we can start to process the commands in the script file.

open("my_input.txt", O_WRONLY|O_CREAT|O_TRUNC|O_LARGEFILE, 0666) = 3
fcntl64(1, F_DUPFD, 10)                 = 10
dup2(3, 1)                              = 1
close(3)                                = 0
write(1, "one line of text\n", 17)      = 17
dup2(10, 1)                             = 1
close(10)                               = 0

Now we’re going to write to a file using redirection. First, open opens/creates the “my_input.txt” file for writing in fd 3. Then, fcntl64 uses F_DUPFD (10) command to get the next available fd numbered >=10 and copy fd 1 (initially opened for stdout) to the new fd 10. This saves the original content of fd 1 (stdout), so it can be restored later.

Next dup2 copies fd 3 to fd 1 so that writing to fd 1 ends up in the file opened by fd 3. The write call then writes the next 17 bytes from the buffer to fd 1. Afterwards the redirection is reverted, by copying fd 10 (original value for fd 1) back to fd 1. Now fd 1 points to stdout as in our initial situation. The fd’s which are not needed any longer are closed.

open("my_input.txt", O_RDONLY|O_LARGEFILE) = 3
fcntl64(0, F_DUPFD, 10)                 = 10
dup2(3, 0)                              = 0
close(3)                                = 0
read(0, "one line of text\n", 128)      = 17
open("my_output.txt", O_WRONLY|O_CREAT|O_APPEND|O_LARGEFILE, 0666) = 3
fcntl64(1, F_DUPFD, 10)                 = 11
dup2(3, 1)                              = 1
close(3)                                = 0
write(1, "one line of text\n", 17)      = 17
dup2(11, 1)                             = 1
close(11)                               = 0
read(0, "", 128)                        = 0
dup2(10, 0)                             = 0

This time we’ll both read and write using redirection.

Again, open prepares “my_input.txt” for reading in fd 3. This time, save fd 0 (by default stdin) to fd 10. dup2 copies fd 3 to fd 0 (redirecting “my_input.txt” to stdin) and close fd 3. Next, read the next 128 bytes from fd 0 (“my_input.txt”) and save to the buffer.

Then, “my_output.txt” is opened (created) for writing in fd 3. Now fcntl64 uses F_DUPFD (10) to get the next available fd >= 10 (which at this point is 11 as fd 10 is already open) and copy fd 1 to it. The fd 3 is copied to fd 1 using dup2.

Finally, write 17 bytes from the buffer to fd 1, which at this moment points to “my_output.txt”. The redirection is reverted by copying fd 11 to fd 1 with dup2, and fd 11 can be closed.

A next attempt to read from fd 0 results in 0 bytes read, indicating the end of file is reached. The redirection is reverted by copying fd 10 to fd 0 and closing fd 10.

exec, open, close, read and write are handled. Let’s look at creating child processes and removing files.

Child processes

clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb6f50068) = 3482

The parent process uses clone to create a child process to execute the rm command. The logging of this child process is logged in the second my_strace.log.<pid> file, where in this example pid=3482, but this varies on each run.

execve("/bin/rm", ["rm", "my_input.txt"], [/* 17 vars */]) = 0

Output tuning

By default the strace produces all system calls performed by the executable. As this can be overwhelming, the -e switch can be used to look for specific system calls. When examining this with -eopen the following is output is given:

strace -eopen ls
open("/etc/", O_RDONLY)      = 3
open("/lib64/", O_RDONLY)     = 3
open("/lib64/", O_RDONLY)    = 3
open("/lib64/", O_RDONLY) = 3
open("/lib64/", O_RDONLY)      = 3
open("/lib64/", O_RDONLY) = 3
open("/lib64/", O_RDONLY)   = 3
open("/lib64/", O_RDONLY)     = 3
open("/lib64/", O_RDONLY)  = 3
open("/etc/selinux/config", O_RDONLY)   = 3
open("/proc/mounts", O_RDONLY)          = 3

This can come in handy to troubleshoot specific system calls. A list of available syscalls can be seen in man syscalls. For more details on a syscall, look it up in the man page. Some syscalls have several variant and might be referenced in strace output with different names; try to look them up without certain prefixes to find the relevant man pages. For performance measuring the -T and -c flags are usefull:

  • -T Show the time spent in system calls. This records the time difference between the beginning and the end of each system call.
  • -c Count time, calls, and errors for each system call and report a summary on program exit.
Read the Docs v: latest
On Read the Docs
Project Home

Free document hosting provided by Read the Docs.